 |
|||||||
|
|||||||
|
|
|||||||
|
|||||||
|
|
| XC17S50APC资料 | |
|
XC17S50APC PDF Download |
|
File Size : 105 KB
Manufacturer:XILINX Description:1. Connect the device as follows: gate to B, drain to C, source to E. 2. Set the MAX PEAK VOLTS to 15 V. 3. Set the SERIES RESISTOR to 0.3 Ohms. 4. The POLARITY switch should be set to NPN. 5. The MODE switch should be set to NORM. 6. Set the STEP AMPLITUDE to 1V. 7. Set NUMBER OF STEPS to 10. 8. Set OFFSET MULT to 0. 9. The CURRENT LIMIT should be set to 500 mA. 10. The STEP MULTIPLIER button should be OUTthat is, 0.1X not selected. 11. On the PULSED STEPS selector, the 80 microsec button should be IN (or the 300 microsec, if the 80 is not available). 12. On the RATE selector, the 0.5X button should be IN. 13. Set VERTICAL CURRENT/DIV at 1 amp/div (IRF630). This scale should be chosen according to the on-resistance of the device being tested 14. Set the CONNECTION SELECTOR to the STEP GEN position in the EMITTER GROUNDED sector. 15. Connect the device using the LEFT/RIGHT switch and raise the VARIABLE COLLECTOR SUPPLY voltage until the desired value of drain current is obtained. RDS(on) is obtained from the trace by reading the peak values of current and voltage (see Figures 7and 8). RDS(on) = VDS/ID. Logic level devices would have different settings for 6, 7 and 8 so that the on-resistance is measured at the specified gate voltage |
|
| 相关型号 | |
| ◆ PXV1220S-3DB-N1 | |
| ◆ UF2492M388 | |
| ◆ Z86E0812PSC | |
| ◆ Z8622704PSC | |
| ◆ Z85C3008VSC | |
| ◆ Z8523010VSC | |
| ◆ Z84C9010VSC | |
| ◆ Z80SIO | |
| ◆ Z8028012VSC | |
| ◆ Z8018010VSC | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：XC17S50APC 厂 家：XILINX 封 装：05+02+ 批 号：110 数 量： 说 明： |
|||||
|
运 费： 所在地： 新旧程度： |
|||||
| 联系人：张小姐、 颜先生13661569158 |
| 电 话：400-878-9158,021-54286636 |
| 手 机：13661569158 |
| QQ：12230627,596815151,531081618 |
| MSN： |
| 传 真：021-54286636 |
| EMail：susumu@susumu.com.cn |
| 公司地址： 上海市古楼公路348弄25号 |
建议使用分辨率:1024*768